Electrician in Arlington Heights: Safer Power for Older Homes
Arlington Heights Homes Were Built for Less Power Than You Use Today
Need a licensed electrician in Arlington Heights for an older home? In Arlington Heights, the typical house was built around 1974. About four in ten homes went up before 1970, during the postwar boom. Their panels and wiring were sized for a few lamps, a range and a TV.
Today you run air conditioning, a full kitchen, home offices and maybe an EV. We help you add that power safely. We upgrade panels, replace worn wiring, wire remodels and inspect homes before a sale. Every visit starts with a free on-site estimate and a clear written plan.
Your home has history. Your wiring should keep up with the way you live now.
Electrician in Arlington Heights for Ranches, Cape Cods and Colonials
Many Arlington Heights homes are ranches, Cape Cods and colonials from the 1950s through the 1970s. In Ivy Hill and Catino Estates, we often find original panels, two-prong outlets and circuits added by past owners. Each era needs a different fix, so we start by looking, not guessing. Here is the work we do most often for Arlington Heights homeowners:
Panel Upgrades for 1950s–1970s Homes
Older homes often still run on 60- or 100-amp service. That is not enough for central air, a modern kitchen and an EV. We run a load calculation, upgrade you to 200 amps and coordinate the ComEd meter work. See our electrical panel upgrade service.
Rewiring and Ungrounded Outlets
Two-prong outlets mean no ground wire. Cloth-covered wiring gets brittle with age. We replace old branch circuits with new copper wiring and grounded outlets. We open as little wall as possible in finished rooms. Learn more about whole-house rewiring.
Kitchen and Bathroom Remodel Wiring
Opening walls in an older kitchen often shows one weak circuit feeding every counter outlet. We add dedicated circuits for your appliances, GFCI protection near water and new lighting. Then we get the work inspected before the drywall goes up.
Basement Finishing and Sump Pump Circuits
Heavy rain can push water into Arlington Heights basements. A sump pump on its own circuit keeps running when other circuits trip. We wire finished basements with AFCI and GFCI protection, plus outlets on every wall. See our basement wiring page.
EV Chargers for Garages and Driveways
A Level 2 charger needs a dedicated 240-volt circuit. First we check that your panel can carry the load. Then we pull the permit, mount the charger and test it with you. Most installs take one visit.
Pre-Sale and Pre-Purchase Inspections
Buyer inspectors look hard at older panels, ungrounded outlets and missing GFCI protection. We inspect the system and give you a written report, ranked by urgency. Sellers fix issues before listing. Buyers know what the home needs. See our home inspection repairs.
Why Arlington Heights Homeowners Call Energy Co.
Older homes in Arlington Heights rarely match their original plans. Rooms were added, garages were finished and wiring was changed over the years. You need an electrician who traces the real system before making a change. Here is what you get with us:
Permits Handled for You
We file permits with the Village Building & Life Safety Department and book every inspection. You do not have to visit Village Hall.
Licensed and Fully Insured
Our electricians are licensed and carry full liability insurance. That protects your home and your sale if a buyer asks for records.
Care Inside Finished Homes
We cover floors, cut small openings and clean up each day. Your home looks the same when we leave, with better wiring inside.
Written Estimates First
You get a free on-site estimate with each item listed. Nothing changes without your approval.
Close to Home
Our shop in Schaumburg is about 10 miles away. That makes return visits and urgent calls quick and easy to schedule.
How Hiring an Electrician in Arlington Heights Works
Hiring an electrician in Arlington Heights with Energy Co. follows six steps:
- Call or send a request: tell us about your home and the problem.
- Free on-site visit: we inspect your panel, wiring and the work area.
- Written estimate: you see each item and its cost before you decide.
- Permit: we file it with the Village through its online permit portal.
- The work: we finish on the agreed schedule and clean up each day.
- Inspection and walkthrough: we meet the inspector and show you what changed.
Call (773) 895-5224 to book your free estimate.
Yes, we serve all of Arlington Heights, including ZIP codes 60004 and 60005. That covers older areas like Ivy Hill and Scarsdale, plus newer areas like Northgate.
Yes, most electrical work needs a Village permit, including panel upgrades, new circuits and EV chargers. We apply through the Building & Life Safety Department and schedule every inspection.
Often it is not, once you add central air, a modern kitchen or an EV charger. We run a load calculation and tell you if a 200-amp upgrade makes sense.
Two-prong outlets are not grounded, so they offer less shock protection. We can add a ground, install GFCI protection or rewire the circuit, depending on what we find.
It depends on the condition of the wiring, not only its age. We test the circuits and show you which parts need work, so you only pay for what is needed.
Yes, we wire kitchen remodels from rough-in to final inspection. We add dedicated appliance circuits, GFCI outlets and new lighting to current code.
Most panel upgrades take one day of work. ComEd needs to disconnect and reconnect the meter, and we schedule that for you.
Yes, a pre-listing inspection helps you fix issues before a buyer finds them. You get a written report you can share with buyers.
Yes, we install Level 2 chargers in garages and driveways across Arlington Heights. We check your panel, pull the permit and finish most installs in one visit.
Stop resetting it and unplug what is on that circuit. Then call us at (773) 895-5224, because a breaker that trips over and over is warning you about a problem.